Nedis is simplifying the way we control room light lamps and light bulbs, eliminating the need for wires. Using the easy stick on the wall, RF 433 Light Switch Single Button (RFWS10WT) together with Nedis Dimmable RF Built-In Switch (RFPSD110WT) you can easily control any* ceiling light lamp or bulb without the need of running the wires for the switch.
|No HUB Required
This wall switch might look like any ordinary one but it is much more than that. You don’t need to have wires for it making it very easy to install and hence why it’s perfectly safe for kids. It works independently from any other hub or needing an extra gateway and it peers easily with the Dimmable RF433 Built-In Switch.
|Easy to install and setup
Standard looking, square light switch button, measuring 8cm by 8cm with only 1cm thickness, makes it perfect for any room, home or office and can be mounted directly on the wall surface thanks to its flatback design.
Peering with Nedis Dimmable RF Built-In Switch (RFPSD110WT), it’s as easy as long-pressing the “Learning” button on the RF Built-In switch and then long-pressing the button on the switch (RFWS10WT). Nedis Dimmable RF Built-In Switch Module (RFPSD110WT) can work with multiple buttons at the same time, up to 5, thus making it a great solution for hallways or large rooms where you need 2 or more light switch buttons to control the light in the room. This solution is not only replacing the wires you need to run from the light bulb to the switch button, but also you don’t need to understand how to create the electrical circuit used with a 2way switch and a 3way switch that can be very daunting or overcomplicated sometimes.
The dimming function can be achieved with ease. After peering the button with the RF Built-In Switch (RFPSD110WT), when the light is on, by pressing twice the switch-on position on the switch, the light bulb will start waving from maximum light intensity to minimum and back. By pressing again once the on position on the light switch, the bulb will retain the light intensity it had at that moment in time. Afterwards, switching it off and on, the light intensity stays as previously defined.
*Not suitable for LED Bulbs